This document contains instructions for installing your Gemalto Sentinel SuperPro key so that you can use hardware-locked CrossWorks licenses. You only need to install the Sentinel drivers if you have purchased a 'Shared' developer license with a Sentinel SuperPro key.
In order to use your SuperPro key will need to install the Sentinel Driver, which is covered here, and the CrossWorks IDE which is covered separately.
This is the device driver version 7.6.0 required for communicating with the following hardware keys: Sentinel Hardware Key; Sentinel Dual Hardware Key. Whitney Way, Suite 160 Madison, WI 53705, U.S.A. Phone: (608) 238-2171, Fax: (608) 238-9241 Email: info@powline.com. Hello All, Might be barking up the wrong tree but I'm looking for some direction to get a new Windows 10 Box with integrated parallel port to see an old. Open the Windows Mobility Center, and you will see a few options. Move the slider under the Keyboard backlight tab to the right to enable the backlight. Click on the tab to access additional options. Enable Keyboard lighting and select the brightness you want. Next, choose the time for keyboard backlight's auto shutdown.
System Requirements
Support for Sentinel drivers is provided for the following operating systems:
- Windows (XP,Vista,7,8) Windows 10 is not officially supported by Gemalto as yet but appears to run without problems.)
- Ubuntu (14.04 LTS and 16.04 LTS (32-bit and x64))
- macOS (Mac 10.7.5 Lion to Mac 10.15 Catalina).
Installing the USB Drivers
Installing the USB Drivers - Windows
Download the 'Sentinel Driver' from here. At the time of writing, the Sentinel driver for Windows is at version 7.6.0 described as 'Sentinel System Driver Installer for Sentinel SuperPro, UltraPro and SHK'
- Before starting, ensure that your USB Sentinel is unplugged.
- Unzip the archive and run the Sentinel System Driver Installer.
- Click Next to move to the licensing screen.
- Read and accept the License Grant/Warranty statement.
- Click I accept the terms in the license agreement.
- Click Next to move to the Setup Type screen.
- Select the Complete installation option.
- Click Next to start the installation. Once installed, the InstallShield Wizard completes.
- Click Finish to close the Sentinel driver Installer.
- Once completed reboot your machine and insert the USB dongle.
- To check that the Sentinel driver has installed correctly, go to the Windows device manager >Universal Serial Bus controllers you should seen an entry for 'SafeNet USB SuperPro/UltraPro'.
Once complete, your key is ready for use:
Installing the USB Drivers - Ubuntu
- Before starting, ensure that your USB Sentinel is unplugged.
- Download Sentinel Protection Server from here
- Open a terminal window 'Ctrl + T' and change directory to the downloaded folder by default this is 'Downloads' in the home folder.
- cd to Debian_support/driver
- Ensure that 'execute' permissions are added to the shell script sud_install.sh
- Run
- To check the correct installation of the Sentinel USB dongle. Using a terminal type lsusb You should see a list of USB devices connected to your Ubuntu machine. One should read something like Bus 001 Device 004: ID 04b9:0300 Rainbow Technologies, Inc. SafeNet USB SuperPro
Installing the USB Drivers - macOS
- Before starting, ensure that your USB Sentinel is unplugged.
- Download the 'Sentinel System Driver' from here.
- Run the installer and follow the installer instructions. When prompted by the installer, make sure you allow the system extension signed by 'SFNT Germany GmbH' to load.
- Once the installer has completed, insert the USB Sentinel into your Mac and start CrossWorks.
- Check the hardware locked license is detected by CrossStudio by clicking Tools > License Manager > Manage Activations. You should see a product activation listed as 'Sentinel License'.
Gateway to Supportive Information Through Videos and Documentation
Tools and Information for Self Support
OMEGA Software
Product Literature
Product Registration
Software Download
Material Settings Update for OMEGA™ 4.0 to 6.5 PLUS EDGE FX Firefile(Please refer to the Material Update Readme Document for more details regarding this update.)
Additional software downloads »
Tips & Tricks
Let OMEGA automatically choose an optimum halftone dot for output
Popular Accelerator Keys to Save Time
Reflective Material and Software Tips
Additional tips & tricks »
Tutorial Videos
Flexi 7.7v2 Software Cant Find Hardware Key Driver
OMEGA 7.0 Demonstrations
GerberColor Spectratone
Backcut Decals with EDGE and OMEGA
Additional videos »
Webinars
What's New in OMEGA 6.5
OMEGA Tips and Tricks Part 1 Webinar
OMEGA Tips and Tricks Part 2 Webinar
Additional webinars »
GERBER EDGE FX
Product Literature
GERBER EDGE FX Owner's Manual
Packing/Unpacking and Installation Guide
GERBER EDGE FX Product FAQ
Additional product literature »
Product Registration
Hardware Download
EDGE FX 334.SRE Firefile(Please refer to the Material Update Instructions Document for more details regarding this update.)
EDGE FX Firmware Update (Rev.P)
Tutorial Videos
FX Conversion Caps
GerberColor Spectratone
Additional videos »
Sabre Router
Product Literature
Gerber Sabre 404 & 408 Installation Instructions
Sabre Series Router Pre-Installation Checklist
Sabre Users Manual
Additional product literature »
Tips & Tricks
Collet and Bit Maintenance
Creating a Double-Sided Circle or Oval sign
Electric Spindle Care and Maintenance
Additional tips & tricks »
Plotters
Product Literature
enVision Users Guide
GS15 Plus Users Guide
GS750 Plus Users Guide
GSx Plus Users Guide
Additional enVision literature »
Additional GS Series literature »
Product Registration
Hardware Download
enVision Firmware Update(Please refer to the enVision Rev-H Readme Document for more details regarding this update.)
Tips & Tricks
Collet and Bit Maintenance
Creating a Double-Sided Circle or Oval sign
Electric Spindle Care and Maintenance
Additional tips & tricks »
Plotters
Product Literature
enVision Users Guide
GS15 Plus Users Guide
GS750 Plus Users Guide
GSx Plus Users Guide
Additional enVision literature »
Additional GS Series literature »
Product Registration
Hardware Download
enVision Firmware Update(Please refer to the enVision Rev-H Readme Document for more details regarding this update.)
Tips & Tricks
How to Replace and Calibrate the Carriage on the enVision Plotter
General Maintenance Tips for Gerber Plotters
Print/Cut Calibration for the Gerber EDGE® and Plotters
Additional enVision tips & tricks »
Additional GS Series tips & tricks »
ARTPath and Auto-Carve
Flexi 7.7v2 Software Cant Find Hardware Key Control
Product Literature
ARTPath and Auto-Carve 3D Reference Guide
ARTPath Product FAQ's
Additional product literature »
Flexi 7.7v2 Software Cant Find Hardware Key
Product Registration
